Konica Minolta magicolor 1650EN - Manual (Page 283)

Configuring the Printer (Administrator Mode) 7-98
General
Parame-
ters Ethernet
Frame
Type Sets the Ethernet Frame Type.
Choices: Auto, Ethernet 802.2, Ethernet 802.3,
Ethernet II, Ethernet SNAP
Default: Auto
Configuration Menu Equivalent:
MAIN MENU - INTERFACE MENU -
ETHERNET - IPX/SPX - FRAME
TYPE
Operating
Mode Sets the operating mode.
Choices: Print Server, Remote Printer
Default: Print Server
Print
Server
Parame-
ters Print
Server
Name Sets the print server name.
Range: Up to 63 characters
Default: KMBTxxxxxx
"
“xxxxxx” refers to the last six digits of the
MAC address (in hexadecimal).
Print
Server
Password If the print server requires a password, enter the
password in this field.
Range: Up to 63 characters
Default: [Blank]
Validate
Password Used to validate the password entered in the Print
Server Password field.
Range: Up to 63 characters
Default: [Blank]
Print
Server
Mode Sets the print server mode.
Choice: Bindery, Both, NDS
Default: NDS
Preferred
File Server Sets the name of the preferred file server.
Range: Up to 47 characters
Default: [Blank]
Preferred
NDS Tree Identifies the NDS tree.
Range: Up to 63 characters
Default: [Blank]
Preferred
NDS
Context Identifies the NDS context.
Range: Up to 191 characters
Default: [Blank]
Print
Server
Polling
Rate Sets the time interval (in seconds) that passes
between print server pollings.
Range: 1 - 65535 (in seconds)
Default: 1
Item Description