Konica Minolta magicolor 1650EN - Manual (Page 237)

Configuring the Printer (Administrator Mode) 7-52
Toner Out Action Determines if the printer continues accepting jobs
sent to it when a toner out condition occurs.
If "Continue" is selected, printing can continued.
However the printing results are not guaranteed.
Choices: Stop, Continue
Default: Stop
Configuration Menu Equivalent:
MAIN MENU - QUALITY MENU -
TONER OUT ACTION
Density Control Adjusts toner (color) density of each color (cyan,
magenta, yellow, and black). The higher the value,
the higher the density of the color.
Range: 1 - 5
Default: 3
Submit button Saves and applies any changes made.
Reset button Resets all configuration settings to previous values.
Save Custom button Saves the Current values of the parameters as the
Custom settings. Using the Restore Custom but-
ton, you can change the parameter settings back to
the Custom settings after changes are made.
Restore Custom
button Changes all settings to the Custom values.
Restore Factory
button Changes all settings to the Factory values.
Item Description