Konica Minolta magicolor 1650EN - Manual (Page 126)

Printing With NetWare 3-3
7
In Administrator mode of PageScope Web Connection, select NetWare
from the Network tab, and then specify the following settings.
– Enable NetWare: Checked
– Ethernet Frame Type:
Select Auto. (Select the frame type according to the network envi-
ronment.)
– Operating Mode: Select Remote Printer.
– Print Server Name: Specify print server name created in step 4.
– Printer Number:
Specify the printer number (0-255). When 255 is specified, the set-
ting is Auto.
8
Restart the printer (turn the printer off, then on again).
9
Use the NetWare server console to display the print server screen, and
then check that the created printer is shown as Waiting for Job for the
connected printer (0).