Konica Minolta magicolor 1650EN User Manual

Page 131

Printing With NetWare

3-8

–

Ethernet Frame Type:
Select Auto. (Select the frame type according to the network envi-
ronment.)

–

Operating Mode: Select Print Server.

–

Print Server Name: Specify the print server name created in step
4.

–

Print Server Password: Specify only when setting from the Net-
Ware server.

–

Print Server Mode: Select NDS.

–

Preferred NDS Tree:
Specify the name of the tree that Print server logs on to.

–

Preferred NDS Context:
Specify the name of the context that connects to Print server.

–

Print Server Polling Rate: Specify 1. (Change as necessary.)

Restart the printer (turn the printer off, then on again).

Use the NetWare server console to load MONITOR.NLM.

Select the connection information and, in the active connection column,
check that the created Print server is connected.

For NetWare 5.x/6 Novell Distributed Print Service

(NDPS)

Before specifying settings for NDPS, check that the NDPS broker and
NDPS manager have been created and loaded.

Also, before performing the following procedure, check that the TCP/
IP protocol has been set in the NetWare server, and check that the IP
address has been set for this machine and that this machine is on.

Log on to NetWare as an administrator from a client computer.

Start up NWadmin.

Right-click the organization or organizational unit container where you will
create the printer agent, and then click NDPS Printer on the Create sub-
menu.

In the NDPS Printer Name box, enter the printer name.

In the Printer Agent Source column, select Create a New Printer
Agent, and then click the Create button.

Check the printer agent name, and then in the NDPS Manager Name
box, browse through the NDPS manager names, and register one.