Konica Minolta bizhub PRO 1200 User Manual
Page 74
About the STORE/RECALL functions of the copied data
4
bizhub PRO 1200/1051 Scanner
4-43
ST
ORE/RECALL
funct
ion
o
f
th
e
cop
ied
d
a
ta
Chapter 4
Clear All
Reset all the output settings.
Wait
After recalling data, the [Mode Check] screen appears. If there
is no problem, press the [Start] button to start printing. For
more information, refer to "The flow of operation of the Wait
Output" on Page 4-46.
Proof
When printing multiple copies, the [Mode Check] screen ap-
pears after printing one copy. If there is no problem, press the
[Start] button to start printing. For more information, refer to
"The flow of operation of the Proof/Proof (1st Sheet) Output"
on Page 4-47.
Proof (1st Sheet)
When printing multiple copies, only the first page is printed for
the JOB, and then the [Mode Check] screen is displayed. If
there is no problem, press the [Start] button to start printing.
For more information, refer to "The flow of operation of the
Proof/Proof (1st Sheet) Output" on Page 4-47.
If [Proof (1st Sheet)] is not displayed, select [ON] on the [Ad-
ministrator Setting] - [Copy/Printer Setting] - [Proof Print (1st
Sheet) Set] screen.
Auto
If this key is pressed, the output starts without pressing the
start button.
Suspended
Setting it to [Suspended] allows you to edit the JOB Ticket
(Settings).
In the Ticket Edit screen, the change of settings and the JOB
checking ([Output Image], [Sample Output]) can be made.
Changing the settings and/or checking the output have no ef-
fect on other JOB’s that are operating.
For details, refer to “Suspend” on page 4-44.
Button
Function