Konica Minolta bizhub PRO 1200 - Manual (Page 132)

Using the Network Scanner Features 7
bizhub PRO 1200/1051 Scanner 7-21
Usin
g th
e Net
w
o
rk Sca
n
n
e
r
F
e
at
ur
es
Chapter 7
7.5 Transmission to the SMB server
When you send the scanned data to an SMB server, necessary procedures
depend on whether the SMB server is registered in advance or it is input
manually.
!
Detail
Refer to the following pages.
"When an SMB server is Already Registered"..................... p.7-21
"When an SMB server is Input Manually"............................ p.7-24
When an SMB server is Already Registered
1
Press [SCAN] on the touch panel.
The Select Destinations/Storage Locations screen appears.
2
Press the [SMB] key.
– In the initial settings, the Select Destinations/Storage Locations
screen (E-Mail) is displayed. For information on the initial settings of
the Scan tab, contact your administrator of the copier.