beautypg.com

2 transmission to an e-mail address, Transmission to an e-mail address -4, Transmission to an e-mail address – Konica Minolta bizhub PRO 1200 User Manual

Page 115: P.7-4

background image

7

Using the Network Scanner Features

7-4

bizhub PRO 1200/1051 Scanner

Usin

g th

e Net

w

o

rk Sca

n

n

e

r

F

e

at

ur

es

Chapter 7

7.2

Transmission to an E-Mail Address

When you send the scanned data as an attached file of an E-Mail, necessary
procedures depend on whether the addresses are registered in advance or
they are input manually.

!

Detail

Refer to the following pages.

"When an E-Mail Address is Already Registered"................. p.7-4

"When an E-Mail Address is Input Manually"........................ p.7-8

When transmitting a message to the E-mail address, the setting of the
Administrator mail address is required. For details, refer to the “Adminis-
trator registration” in the User's Guide (POD Administrator's Reference).

When an E-Mail Address is Already Registered

1

Press [SCAN] on the touch panel.

The Select Destinations/Storage Locations screen appears.

2

Make sure that the [E-Mail] key is selected.

In the initial settings, the Select Destinations/Storage Locations
screen (E-Mail) is displayed. For information on the initial settings of
the [SCAN] tab, contact your administrator of the copier.

3

If you want to put a Title on an E-Mail, press the [Input Title] key.

Not putting any Title will not cause any problem. An E-Mail without
a Title will be sent with the scanned data being attached.

This manual is related to the following products: