Konica Minolta KIP 7900 - Manual (Page 8)

KIP Unattend Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP America, Inc. © 2011 KIP America, Inc.
- 6 -
Units
Allows the user to set the controller to read either English or Metric standards of measurement.
Media Selection
Allows the user to print their documents on the closest size media loaded in the machine, or to the
‘Exact size’ media. If the user has this
option set to exact, the job will not print out
until the correct size media is loaded into
the machine.
Rotation
Rotate for least paper usage will place the
printed image on the smallest roll saving
the most paper.
Rotate for faster printing will rotate the
printed image to allow for least drum
rotation. This may use more paper.
Password
Allows the user to set a password in the Unattend mode, so that no configuration changes can be
made without entering a password. This password is not encrypted.
Copy Density
Allows the user to change the amount of toner (density) that is being applied to printed files.
Feeder Size
Specific to the KIP 8000. Users must pre-select the size of the sheets in the sheet feed deck. The
corresponding roll size must not be installed when using the sheet feed.