Konica Minolta KIP 7900 - Manual (Page 23)

KIP Unattend Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP America, Inc. © 2011 KIP America, Inc.
- 21 -
DelayBetweenSets=0
MaxImageSize=600
Sets the Maximum Print length of the KIP (in inches)
WireCleanTime=12:00
Value is in military time. A Wire Cleaning will be performed every day on the engine at this defined time,
based on the computer clock.
WireCleanAmount=0
Value is a linear feet total. Once FeetSinceWireClean= counts up to this total, a Wire Cleaning will be
performed, in addition to the time established in WireCleanTime=. Automatic wire cleaning is only
available on certain printer models. Other models should have this feature disabled by changing the
value to 0.
FeetSinceWireClean=166.5468
Value is a counter that keeps track of the number of linear feet printed since the last Wire Cleaning.
Once the WireCleanAmount= is reached, a Wire Cleaning will be performed at the time defined in
WireCleanTime=.
RasterMultiplier=1
This value will be multiplied by the –G value in Request Job Tickets or in the
AddHpglCmd= line, whichever applies. It is used to darken the grayscale level of light HP-RTL data.
KipNumberOfRolls=0
KeyCode=
BackupConfigFile=C:\Program Files\KIP\Unattend\WinUntd.Ini-Bak
SCPFilterDir=C:\SCP\Db
JISTolerance=0
Japanese Image Standard, this is a tolerance that will match non-standard sizes and print them to
Japanese Image Standard sizes.
UseKipFinishResponse=True
ExternalJamReprint=False
WaitASCIIJobs=False
IgnoreKeyCardError=True
KipStatDelay=False
AutoTrimPaper=False