Konica Minolta KIP 7900 - Manual (Page 22)

KIP Unattend Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP America, Inc. © 2011 KIP America, Inc.
- 20 -
AddDWFCmd=-lt 6
Switches may be added to this location to assist with specific printing requirements (contact KIP for
assistance).
AddPSCmd=-dNOTRANSPARANCY
Switches may be added to this location to assist with specific printing requirements (contact KIP for
assistance).
LeadingSpace=0
IgnoreExt=
CopyDensity=2
CyanCopyDensity=0
Utilized with the KIP KC80 Printer.
MagentaCopyDensity=0
Utilized with the KIP KC80 Printer.
YellowCopyDensity=0
Utilized with the KIP KC80 Printer.
MaximumRollSize=36.75
Allows the technician to set the Maximum Roll size the printer will utilize. This can be set a bit larger to
allow off size files to print.
FoldBypass=01
This sets the Folder Bypass to either on (1) or off (0) this is set in KIP PrintNet.
DefaultFileType=V
DefaultJamCopies=2
Value is a number of prints. If a jam occurs, and if Internal Controller=False, Unattend displays a popup
window asking how many copies to reprint. This value is the default number, unless the user changes it. If
Internal Controller=True, the program uses the ReprintJamInches= value to automatically reprint copies.
ReprintJamInches=24
Sets the amount of inches the printer will go back and print after a Jam.