Konica Minolta KIP 7900 - Manual (Page 15)

KIP Unattend Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP America, Inc. © 2011 KIP America, Inc.
- 13 -
7. Time - this is the time of the request
8. Requestor - this is Requestor information input in Request
9. Distribution - this is Distribution information input in Request
10. Description - this is Description information input in Request
11. Move Job buttons - these four buttons will allow the customer to move jobs within the queue and
prioritize them. These four buttons are:
• Move to Top - (remember our example? You need a job NOW!). Highlight the job you need by
double clicking it in the queue, click the “Move to Top” button and the job you need will be
moved to the next job in the queue.
• Move Up One - Highlight the job you need by double clicking it in the queue, click the “Move Up
One” button and the job you need will be moved up one position in the queue.
• Move Down One - Highlight the job you need by double clicking it in the queue, click the “Move
Down One” button and the job you need will be moved down one position in the queue.
• Move to Bottom - Highlight the job you need by double clicking it in the queue, click the “Move
to Bottom” button and the job you need will be moved to the bottom position in the queue.
12. Send Job – This allows the user to send jobs from one network configured KIP printer to another
network configured KIP printer. This helps with load sharing in multiunit installations.
By right clicking on a job (current or subsequent) you are offered 5 items to choose from. These are the
same functionality as outlined above. Move job, Schedule, Remove, and Send To. There is also a
selection for changing media. The job list can be modified by clicking and dragging a single job to any
spot in the list.
Printing to the KIP 9000 Sheet Feed
When Printing to the KIP 9000 sheet feed the tray can hold up to 50 sheets of media (C size or less) for
auto mode printing. If larger than C size media is to be used only one sheet may be loaded at a time.