Kip unattend operator guide – Konica Minolta KIP 7900 User Manual
Page 26

KIP Unattend Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP America, Inc. © 2011 KIP America, Inc.
- 24 -
PreconvertSets=False
Must be set to True for Starprint 1020 printers. Can be set to true for other printers if the controller has
trouble printing at full speed during the first collated set. When set to True, the controller will pre-convert
the complete set of images before any printing takes place. This allows the printer to work at full speed
during the first collated set of printing.
CheckHardwareLockMultiple=False
When set to True will check for KIP Online and/or Powerscript 3 hardware lock multiple times before
rejection.
DontCheckHardwareLock=False
When set to True this will tell the printer not to look for a Hardware lock.
AlwaysUseConfiguredMedia=False
When set to True, will use a configured path setting for Media Type when KIPJL based plot files are
presented to KIP0 via LPR or port copy. When set to False, will use KIPJL based media call.
RotateToSavePaper=False
DontUseCalcompData=False
ReadStatusFile=True
JISStandardCut=False
This will turn on (1) or turn off (0) the use of Japanese Image Standard
RightJustifyFolds=False
AbacusEnabled=True
If Abacus is being used this will be set to True
PrintDriverUnifiedAccounting=False
Turns on the Unified Accounting for the KIP Windows Driver. This can also be turned on through KIP
PrintNet.
WaitForceSize=False
If True will hold a force size job in the queue when media runs out allowing other jobs to print.
DisableFoldReprints=False
IgnoreHDIBorders=False
Ignores existing borders that are on by defaul from within AutoCAD.