Konica Minolta KIP 7900 - Manual (Page 24)

KIP Unattend Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP America, Inc. © 2011 KIP America, Inc.
- 22 -
When set to True, Unattend will automatically cut a trim sheet from a new roll once it is inserted.
PreloadPaper=True
MultPlotCopies=True
UseRigoliFold=False
When set to True, Unattend will attempt communication with a Rigoli Folder.
IgnoreFoldPresets=False
UseKipFold=False
When set to True, Unattend will attempt communication with a KIP Folder.
UseEsteFold=False
When set to True, Unattend will attempt communication with a Este Folder.
UseKipFold500=False
When set to True, Unattend assumes a KIP 500 Fan Folder is present. This statement is not dependent
upon UseKipFold (stated above)
InternalController=True
PrintSeparatorSheetJob=False
PrintSeparatorSheetSet=False
FoldSeparatorSheet=True
ScaleSeparatorSheet=True
ReverseMultipageRaster=False
PrintLocalSeparator=False
When set to True, and if PrintSeparaterSheet=True, the Separator Sheet will print to the KIP Controller’s
default Windows printer instead of the KIP Printer engine.
NewInterface=False
DontEmailErrors=False
CalcompParams=True
ForceTextOn=False
TextOn=False
DontPrintMultipleRaster=False
KeepMultipleSets=True
HardwareConnect=False
Rarely altered. Only set to False if Unattend is being used in Demo mode, or diagnostic mode.