Konica Minolta KIP 7900 - Manual (Page 7)

KIP Unattend Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP America, Inc. © 2011 KIP America, Inc.
- 5 -
Configure Monitored Directory
Files that are sent to the configured monitored directory
will have the parameters that are defined within the mini-
Request as shown to the right. With this, it is possible to
create custom paths that can enlarge / reduce a file,
apply custom pen settings or change the media type. This
is helpful if sending LPR data that has no embedded
information within the printable image.
Monitor Path Selection Arrows
These arrows allow the user to toggle between the monitor paths currently setup on the controller.
Save
Allows the user to save monitor paths created in the set monitor path screen.
Cancel
Allows the user to exit the set monitor path screen and return to the configuration menu.
Miscellaneous Setup
Allows the user to set up custom configurations of media defaults, copy density, password protection,
etc. Variables within the miscellaneous configuration include: