Status, error, and service messages 9-44 – Konica Minolta magicolor 1690MF User Manual
Page 255

Status, Error, and Service Messages
9-44
PAPER SIZE ERROR
RESET PAPER (xxx)
The size of paper
being printed on is
different from the
size of paper speci-
fied in the printer
driver.
Press the Start key to
cancel the caution.
To print on paper of the
size specified in the
printer driver, load
paper of the correct
size into the specified
tray, and then try per-
forming the print job
again.
PC CONNECTION FAILED
While data was
being sent in Scan
mode, the connec-
tion to the computer
was interrupted.
Check the connection
with the computer and
the scanner driver sta-
tus, and then try send-
ing the data again.
Process Caution -
IDC
A process error
occurred in the
machine.
Open and close the
scanner unit.
PROCESS ERROR-xxx
CLEAR BY COVER
REMOVE ORIGINAL
IN ADFR
The document is
loaded in the ADF
while a function is
set that requires
scanning from the
original glass.
Place the document on
the original glass.
RESULTS ARE OVER xxx
The LDAP search
results exceed the
maximum specified
with
MAX.
SEARCH RESULT
in the LDAP SET-
TING menu.
Change the maximum
setting, or change the
search conditions (for
example, increase the
length of the key-
word), and then try
performing the LDAP
search again.
RETURN xx ORIGINAL
to ADF and
PRESS START KEY
After a media mis-
feed has been
cleared from the
ADF, the number of
document pages to
be reloaded into the
ADF is indicated.
Reload into the ADF
the number of docu-
ment pages indicated
by
xx
, and then press
the Start key.
This message...
means...
Do this...