Konica Minolta magicolor 1690MF - Manual (Page 176)

Replacing Consumables 7-13
7
Follow the same procedure to remove the cartridges for the cyan, black,
then yellow toners.
8
Press the Stop/Reset key to reset the machine.
Replacing the Imaging Cartridge
When replacing an imaging cartridge, refer to the following table. For opti-
mum print quality and performance, use only approved KONICA MINOLTA
imaging cartridge for your specific machine type, as listed in the table below.
You can find your machine type and the imaging cartridge part numbers on
the consumables reorder label inside the ADF cover.
"
For optimum print quality and performance, use only the corre-
sponded TYPE genuine KONICA MINOLTA imaging cartridge.
"
You are advised to replace the imaging cartridge when the message
I/C LIFE END/REPLACE I/C appears.
1
Open the scanner unit.
"
If there is paper in the
output tray, remove it,
and then fold up the out-
put tray before opening
the scanner unit.
Machine
Type Machine Part
Number Part Name Imaging Cartridge
Part Number
AM A0HF 012 Imaging Cartridge A0VU 011
EU A0HF 022 A0VU 0Y1
AP A0HF 042 A0VU 0Y1
GC A0HF 082 A0VU 0Y1