Konica Minolta magicolor 1690MF - Manual (Page 253)

Status, Error, and Service Messages 9-42
MEMORY FILE FULL
The maximum num-
ber of image data
files has been
reached. Turn the machine off,
and then, after a few
seconds, turn it on
again. Decrease the
amount of data to be
printed (for example,
by decreasing the res-
olution), and then try
printing again.
MEMORY FULL
The machine has
received more data
than can be pro-
cessed with its inter-
nal memory. Turn the machine off,
and then, after a few
seconds, turn it on
again. Decrease the
amount of data to be
printed (for example,
by decreasing the res-
olution), and then try
printing again.
NO NETWORK SETTING
The network set-
tings had not been
completely specified
when the machine
was switched to
Scan mode. Before scanning in
Scan mode, specify
the network settings in
the NETWORK SET-
TING and E-MAIL
SETTING menus.
NO SUITABLE PAPER
CHECK DUPLEX SETTING
Duplex (dou-
ble-sided) printing is
specified, but paper
with a type or size
incompatible with
duplex (dou-
ble-sided) printing is
selected. Select Letter- or
A4-size plain paper, or
select simplex (sin-
gle-sided) printing, and
then try performing the
print job again.
NO SUITABLE PAPER
LOAD PAPER (xxx)
Paper suitable for
printing is not
loaded in a paper
tray. Load paper suitable for
printing into a paper
tray.
NOT AVAILABLE
The menu cannot
be set. For details on the
menu settings, refer to
“Configuration Menu
Overview” on
page 2-20
This message... means... Do this...