Konica Minolta magicolor 1690MF - Manual (Page 168)

Replacing Consumables 7-5
Replacing a Toner Cartridge
Note
Be careful not to spill toner while replacing a toner cartridge. If toner
spills, immediately wipe it off with a soft, dry cloth.
If MACHINE SETTING/TONER OUT STOP in the UTILITY menu is set to
ON , the message TONER OUT/CHANGE X TONER (where “X” indicates
the color of the toner) appears when the toner cartridge is nearly empty. Fol-
low the steps below to replace the toner cartridge.
"
If MACHINE SETTING/TONER OUT STOP in the UTILITY menu
is set to OFF , printing can continue even after the message “ Toner
Out X ” has appeared; however, the printing quality cannot be guar-
anteed. If printing is continued and the toner becomes empty, the
message “
TONER LIFE END/CHANGE X TONER ” appears and
printing stops. For details on the setting, refer to “MACHINE SETTING
Menu” on page 2-22.
1
Check the message window to see which color toner cartridge needs
replacing.
"
If the machine detects that a toner cartridge is empty ( TONER
OUT or TONER LIFE END appears), the empty toner cartridge is
automatically moved so that it can be replaced.
If you wish to change the toner cartridge, use ether operation described
below to switch the printer to REPLACE MODE.
2
With the main screen displayed, press the * key to display the PRINTER
MODE screen.
3
Press the , key to select T/C CHANGE and then press the Select key.
4
Press the Select key to select REPLACE MODE .
5
Press the + or , key to select the color for the toner cartridge to be
replaced, and then press the Select key.
The toner cartridges rotate within the machine to move the toner cartridge
of the selected color to a position where it can be replaced.
"
To exit REPLACE MODE, press the Stop/Reset key.