Konica Minolta bizhub C10X - Manual (Page 60)

Print Media 46
Use postcards that are
„
Approved for laser printing
DO NOT use postcards that are
„
Coated
„ Designed for inkjet printers
„ Precut or perforated
„ Preprinted or multicolored
"
If the postcard is warped, press on the warped
area before putting it in Tray 1.
„ Folded or wrinkled
Transparency
"
Do not fan transparencies before loading them. Resulting static elec-
tricity may cause printing errors.
"
If you touch the face of the transparencies with your bare hands, print
quality may be affected.
"
Keep the media path clean. Transparencies are especially sensitive to
a dirty media path. If there are shadows on either the top or the bottom
of the sheets, see chapter 9, “Maintenance”.
"
Remove transparencies as soon as possible from the output bin to
avoid static buildup.
You can print continuously with transparencies. However, this could affect the
media feed, depending on the media quality, static buildup, and printing envi-
ronment.
Try printing your data on a sheet of plain paper first to check placement.