Konica Minolta bizhub C10X - Manual (Page 50)

Configuration Menu Overview 36
E-MAIL SETTING Menu
"
Manufacturer’s default settings appear in bold.
"
To edit or erase entered characters, press the Cancel/C key. To can-
cel a setting, hold down the Cancel/C key until, erase all characters,
and then press the Cancel/C key again.
1 SENDER NAME
Enter your name as the sender’s name. A maximum of
20 characters can be entered. The default sender
name is “bizhub C10 ”.
2 E-MAIL
ADDRESS
Type in the E-mail address of the E-mail sender when
using network scanning. A maximum of 64 characters
can be entered.
3 SMTP SERVER
Type in the IP address or host name for the SMTP
server. A maximum of 64 characters can be entered.
4 SMTP PORT
NO.
Settings 1-65535 (Default : 25)
Specify the number of the port communicating with the
SMTP server.
5 SMTP TIME-
OUT
Settings 30-300 (Default : 60)
Enter the amount of time (in seconds) until the connec-
tion with the SMTP server times out.
6 TEXT INSERT
Settings
ON / OFF
Select whether or not the previously specified text is
inserted into the body of the E-mail message when
using network scanning.
If ON is selected, the following text is inserted as the
body of the E-mail message.
Image data (TIFF format) has been attached to the
E-mail.
If OFF is selected, only the scanned image is attached,
and no text is inserted into the E-mail message.
7 DEFAULT
SUBJECT
Specify the subject of the E-mail message when using
network scanning. A maximum of 20 characters can be
entered. The default subject is “From bizhub C10".