Konica Minolta bizhub C10X - Manual (Page 133)

Registering Recipients 119
2
Check that the FAX REGISTRATION screen appears, then press the
Menu Select key, and then press the , key.
3
Check that the SPEED DIAL screen appears, and then press the Menu
Select key.
4
Using the keypad, enter the speed dial number that you want to change or
delete.
5
Press the Cancel /C key.
6
Using the* and ) keys, select either “EDIT” or “DELETE”, and then press
the Menu Select key.
"
If “EDIT” was selected, the name is displayed. (Continue with step 7.)
"
If “DELETE” was selected, the settings programmed for the speed dial
number are deleted and the speed dial input screen appears again.
Skip to step 9.
"
If a speed dial number used in group dialing is deleted, it is also
deleted from the corresponding group dialing.
7
Change the name, E-mail address as desired.
"
If you try to change the settings for a speed dial number used in group
dialing, a confirmation message appears, asking whether or not to
keep the changed speed dial number in the group dialing. If the Menu
Select key is pressed, the corresponding speed dial number pro-
grammed in group dialing is kept. If the Cancel/C key is pressed, the
corresponding speed dial number programmed in group dialing is
deleted.
"
For details on editing text, refer to “Entering Text” on page 214.
8
When you are finished making changes, press the Menu Select key.
The speed dial input screen appears.
9
To change or to delete another speed dial number, enter the speed dial
number, and then repeat the procedure starting from step 5.
OR
To finish the procedure and return to the Scan mode screen, continue
pressing the Cancel/C key until the Scan mode screen is displayed.
Group Dialing
Programming Group Dialing
Register multiple frequently used E-mail addresses (maximum 50) together
with one-touch dial keys and speed dial numbers. Press a one-touch dial key
when sending an E-mail to recall them.