Konica Minolta bizhub C10X - Manual (Page 132)

Registering Recipients 118
1
Press the Menu Select key, then the , key three times.
2
Check that the FAX REGISTRATION screen appears, then press the
Menu Select key, and then press , key.
3
Check that the SPEED DIAL screen appears, and then press the Menu
Select key.
4
Using the keypad, enter the 3 digits speed dial number (ex. 011) that you
want to program.
"
If the speed dial number that is entered is already registered with a
recipient, the message “REGISTERED!” appears. Press the Menu
Select key, and then press a speed dial number with no recipient reg-
istered.
5
Enter the name of the speed dial to be programmed, and then press the
Menu Select key.
"
Text up to 20 characters long can be entered for the name.
"
For details on entering/editing text and the characters that can be
entered, refer to “Entering Text” on page 214.
"
To cancel programming, press the Cancel/C key. (To cancel program-
ming while the name is being entered, press the Menu Select key,
and then press the Cancel/C key.)
6
Using the keypad, enter the E-mail address of the recipient and then
press the Menu Select key. The entered information is registered with the
speed dial number, and then the speed dial input screen appears.
"
The E-mail address can contain a maximum of 50 characters.
"
For details on entering/editing addresses, refer to “Entering Text” on
page 214.
"
To cancel programming, press the Cancel/C key. (To cancel program-
ming while the address is being entered, press the Menu Select key,
and then press the Cancel/C key.)
7
To program another speed dial number, enter the speed dial number, and
then repeat the procedure starting from step 4.
OR
To finish the procedure and return to the Scan mode screen, continue
pressing the Cancel/C key until the Scan mode screen is displayed.
Changing/Deleting Speed Dial Information
The registered speed dial information can be corrected.
1
Press the Menu Select key, then the , key three times.