Konica Minolta bizhub PRESS C1085 - Manual (Page 84)

Replenish and Replace Consumables 7
7-6 bizhub PRESS C1100/C1085 (IC-602)
7.1
3
Press the [Add Stapler] tab of the required saddle stitcher, then follow the on-screen instructions to re-
place a staple cartridge.
% The number on the right-hand side of the help message indicates a replacement procedure. To dis-
play the next step, press [,].
NOTICE
The Saddle Stitcher SD-506 contains two staple cartridges. Check the message, then be sure to pull
out the empty cartridge.
To remove a staple cartridge, securely hold its right and left sides, and pull it out toward you.
To install a staple cartridge, be careful not to mistake the top side for the bottom side. If the top side is
facing down, the staple cartridge cannot be inserted.