Konica Minolta bizhub PRESS C1085 - Manual (Page 64)

Image Quality Adjustment 6
6-16 bizhub PRESS C1100/C1085 (IC-602)
6.2
Executing calibration
The adjustment method varies depending on whether or not the [Color Density Control] function is used.
When [Color Density Control] is used (recommended):
Select [Color Density Control] to carry out the adjustment. Setting this function to ON executes calibration at
periodic intervals (page 6-16).
When [Color Density Control] is not used:
Use Color Centro and a colorimeter to carry out the manual adjustment (page 6-21).
Tips
- If the image quality with higher accuracy is required, you can use the adjustment method with [Gamma
Automatic Adj.], [Maximum Density Adjustment], or [Color Density Manual Control] added. For details,
refer to the [HTML User's Guide].
6.2.3 Color Density Control
Using the Color Density Control function, you can configure a setting so that this machine automatically ex-
ecutes calibration at periodic intervals.
Calibration is executed every arbitrarily specified number of sheets, and you can keep printing using the ap-
propriate density.
Tips
- The printed chart is included in the print count.
Auto setting of Color Density Control
1
Press [Adjustment] on the [MACHINE] screen.
2
Press [Color Density Control].