Konica Minolta bizhub PRESS C1085 - Manual (Page 16)

Turning the Power ON/OFF 2
2-4 bizhub PRESS C1100/C1085 (IC-602)
2.1
Tips
- If [Machine is warming up] is displayed on the [MACHINE] screen, it indicates that this machine is in the
warm-up state. Warm-up processing takes approximately 8 minutes.
Turning the power off
1
Turn off the sub power switch.
The touch panel display is cleared, and the Power LED on
the control panel is changed from green to red.
NOTICE
While the following message is displayed, do not turn off the
main power switch. Otherwise, a problem such as a toner fix-
ation in the machine may occur.
[Cooling in progress / Power is turned off automatically]
[Power off in progress / Please do not turn the main power off]
2
Turn off the main power switch.
NOTICE
When turning the main power switch off then on, be sure to
wait for 10 seconds or longer before turning the main power
switch on again. If the main power switch is turned on again
within 10 seconds, the machine may not function normally.
OFF ON
OFF ON