Konica Minolta bizhub PRESS C1085 - Manual (Page 56)

Both Sides Adjustment 6
6-8 bizhub PRESS C1100/C1085 (IC-602)
6.1
12
Press [Print Mode].
13
When the [PRINT MODE] screen is displayed,
press Start on the control panel.
A test chart is printed out.
14
Press [Exit Print Mode].
15
Measure a misalignment between the
marks of [1] to [4] printed on the [back] side of
the output chart and the
marks on the
[front] side.
% In this figure, the black mark indicates
the front side and the blue mark indi-
cates the back side.
% Measure a misalignment between printing
positions in the horizontal direction (X axis)
and vertical direction (Y axis).
% The measurement value can be entered in
units of up to 0.1 mm.
% For example, as illustrated in this figure, if
the mark of [1] printed on the back
side is misaligned 0.5 mm rightward and 0.3
mm downward compared with the front
side, adjust 0.5 mm in the X direction and 0.3
mm in the Y direction.
[ 1 ]
x
y
back