Lenovo B430 Notebook - Manual (Page 74)

1c
1a
1d
1g
1e
1f
1b
Note: Your model might look slightly different from the illustration above.
2
Note: Your model might look slightly different from the illustration above.
When installing: Before you attach the thermal pipes to the computer, apply thermal grease, at an amount
of 0.2 grams, on the part marked
a as shown in the following illustrations. Either too much or too less
application of grease can cause a thermal problem due to imperfect contact with a component. You need to
peel the thin film off from the rubbers marked
b .
For models with a discrete thermal pipes
68 Hardware Maintenance Manual