Lenovo ThinkPad X140e - Manual (Page 98)

Note: Depending on the operating system you are using, some menu items listed in this chapter might not
be available on your computer, and some menu items might be slightly different from the actual menu items
displayed on your computer.
Main menu
The Main menu is the first interface you see after you enter ThinkPad Setup. It displays the following
configuration of your computer:
• UEFI version
• UEFI date
• Embedded controller version
• Machine type model
• System-unit serial number
• System board serial number
• Asset tag
• CPU type
• CPU speed
• Installed memory
• UUID
• MAC address (Internal LAN)
• Preinstalled operating system license
• UEFI Secure Boot
Config menu
If you need to change the configuration of your computer, select Config from the ThinkPad Setup program
main menu.
The following submenu is displayed:
• Network: Set the LAN related functions.
• USB: Enable or disable USB related functions.
• Keyboard/Mouse: Set the keyboard and mouse related functions.
• Display: Specify the settings for display output.
• Power: Set power management related functions.
• Beep and Alarm: Enable or disable the audio related functions.
• Serial ATA (SATA): Specify the settings for the hard disk drive.
Notes:
• The default settings are already optimized for you. If you consider changing the computer configuration,
proceed with extreme caution. Setting the configuration incorrectly might cause unexpected results.
• On each submenu, you can enable a function by selecting Enabled, or disable it by selecting Disabled.
The following table shows the contents of the Config menu.
Notes:
• Some items are displayed on the menu only if the computer supports the corresponding features.
82 User Guide