Avaya NN42030-102 - Manual (Page 38)

Advanced features
38 NN42030-102 Avaya 3100 Mobile Communicator 3.1 Standard 04.05 October 2010
Figure 3: Direct mode
When the Avaya 3100 MC - Client for Nokia is configured for Direct mode, you can switch from Direct
mode to Call-me-First mode for advanced calls. For more information, see
“Toggling between call
modes” on page 38 .
Call-me-First mode
In Call-me-First mode, your calls are completed in two steps. First the enterprise telephony system calls
you. After you answer, the enterprise telephony system calls the other party. After the other party answers,
you are connected and can begin talking. For more information, see
Figure 4 "Call-me-First mode" on
page 38 .
Figure 4: Call-me-First mode
Toggling between call modes
You change between the two calling modes by using Options, Change Call Setup, or by changing your
Call Setup parameters (see
“Configuring your Call Settings” on page 26 ).
Call Intercept
The Avaya 3100 Mobile Communicator can intercept calls made from the native Nokia dialer so that calls
can go through the Avaya 3100 Mobile Communicator. Use the Options pane to control the use of the
native Nokia dialer. The Options pane displays the status of the feature. Select the Call Intercept entry to
toggle the feature.
• When Call Intercept is on displays, the Avaya 3100 Mobile Communicator intercept calls made from
the native Nokia dialer.
• When Call Intercept is off displays, calls route from the native Nokia dialer without Avaya 3100
Mobile Communicator interaction.