Defining static route entries – ADC 410F User Manual
Page 59
Chapter 6: Configuring the Ports
Megabit Modem 410F and 420F User Manual
51
Defining Static Route Entries
You can enter up to 32 static routing IP addresses that the modem recognizes in the routing
address tables, in addition to the routing IP addresses that the modem learns.
(
See
for more information on defining static route entries
.)
1
Enter static routes.
2
Click
Add
to accept this entry.
3
To delete a
Static Route Entry
:
a
Click the entry in the list shown in field
above to select it. The entry displays in the
Static Route Entry
fields
and
.
b
Click
Delete
to remove the entry.
4
Click Done when you complete all configuration additions and deletions.
Enter the
Destination
IP address and
net mask
destination
.
Enter the
Gateway
IP address to the next hop.
All static route entries are listed in this table after you enter the parameters in
fields
and
.
192.168.30.0
255.255.255.0
192.168.10.2