ADC 410F - Manual (Page 23)

Chapter 3: Installing the Megabit Modem 410F and 420F
Megabit Modem 410F and 420F User Manual 15
The following table shows the signal on each pin for the ADSL port. The connector for this
interface is an RJ-11.
The following table shows the signal on each pin when the switch is in either the MDI or the
MDI-X position for the 10/100BASE-T port. The connector for this interface is an RJ-45.
Pin Signal
1 Not used
2 Not used
3 Ring
4 Tip
5 Not used
6 Not used
MDI MDI-X Signal Description
1 3 TX+ Transmit Data (+)
2 6 TX- Transmit Data (-)
3 1 RD+ Receive Data (+)
4 4 Not used Not used
5 5 Not used Not used
6 2 RD- Receive Data (-)
7 7 Not used Not used
8 8 Not used Not used