8 connecting camera to computer, Transferring pictures with the usb cable, Connecting camera to computer – Kodak DX6490 User Manual
Page 91
79
8
Connecting Camera to
Computer
CAUTION:
Install Kodak EasyShare software before connecting the
camera or optional dock to the computer. Failure to do so
may cause the software to load incorrectly.
You can transfer pictures and videos from the camera to the computer using:
!
The (included) USB cable.
!
The (optional) Kodak EasyShare camera dock 6000. See
connecting with the camera dock.
!
The (optional) Kodak EasyShare printer dock 6000. Purchase these and
other accessories at a dealer of Kodak products or visit
Transferring Pictures With the USB Cable
1
Turn off the camera.
2
Plug the labeled end of the USB cable
into the labeled USB port on your computer.
See your computer user’s guide for details.
3
Plug the other end of the USB cable into the
labeled USB port on the camera.
4
Turn on the camera.
Kodak EasyShare software opens on your
computer. The software prompts you
through the transfer process.