Kodak DX6490 - Manual (Page 50)

38
Chapter 2
Setting Focus Zone in PASM Mode
If you do not get the composition and focus results you want by using framing
marks (see
page 23 ), use the Focus Zone feature to select a large or a
concentrated area of focus.
NOTE: Focus Zone is available in PASM mode only.
1 In PASM mode, press the Menu button.
2 Press to highlight Focus Zone , then press the OK button.
3 Press to highlight an option, then
press the OK button.
Multi-zone (default)— evaluates 3
zones to give an even picture focus. Ideal
for general picture taking.
Center zone—evaluates the small area
centered in the viewfinder. Ideal when
precise focus of a specific area in the
picture is needed. The Focus framing
marks stay in the center (see
page 23 ).
4 Press the Menu button to exit the menu.
This setting remains until you change it
or use Reset (see
page 40 ) to return to the
default setting.