Using an external flash unit – Kodak DX6490 User Manual
Page 40
28
Chapter 2
Using an External Flash Unit
Use an external flash unit when you want additional or specialized lighting. You
can use the camera’s built-in flash as well to provide extra fill flash.
1
Turn off the camera and flash unit.
2
Plug your external flash unit cable into the
external flash connector on the camera.
The external flash unit is live when
connected to the camera. Each time the
camera takes a picture, the external flash
unit is signaled to flash, regardless of the
camera flash setting.
Refer to your external flash unit user’s
guide for details.
NOTE: The connector accepts all standard
external flash cables, maximum 500
volts.
External
flash
connector
See also other documents in the category Kodak Cameras:
- LS753 (73 pages)
- LS753 (64 pages)
- DX7590 (82 pages)
- CX7220 (60 pages)
- CX7220 (72 pages)
- C533 EN (67 pages)
- CX7330 (61 pages)
- LS443 (122 pages)
- Z760 (91 pages)
- Z760 (79 pages)
- DX3900 (105 pages)
- Z700 (78 pages)
- CD40 (79 pages)
- Z7590 (118 pages)
- Z7590 (104 pages)
- Z612 (101 pages)
- Z612 (90 pages)
- DC3400 (156 pages)
- CX4200 (106 pages)
- Z650 (94 pages)
- Z650 (77 pages)
- DX7440 (67 pages)
- LS755 (83 pages)
- LS755 (80 pages)
- V610 (106 pages)
- V610 (87 pages)
- Z740 (70 pages)
- CX7530 (66 pages)
- CX7530 (67 pages)
- CX7530 (83 pages)
- CX7525 (83 pages)
- CX7525 (66 pages)
- V530 (95 pages)
- V530 (73 pages)
- EASYSHARE C603 (72 pages)
- C643 (83 pages)
- C340 (83 pages)
- C340 (74 pages)
- EasyShare C340 (74 pages)
- V603 (91 pages)
- V603 (76 pages)
- DX3500 (92 pages)
- C663 (85 pages)
- EasyShare C663 (74 pages)
- Z730 (97 pages)