Kodak DX6490 - Manual (Page 46)

34
Chapter 2
Setting White Balance in PASM Mode
Whites can look white in daylight, but different under other lighting conditions.
Use White Balance to correct the color shifts that result from shooting pictures
under different light sources.
NOTE: White Balance is available in PASM mode only.
1 In PASM mode, press the Menu button.
2 Press to highlight White Balance , then press the OK button.
3 Press to highlight an option, then
press the OK button.
Auto (default)— automatically
corrects white balance. Ideal for general
picture taking.
Daylight
—for pictures in natural
lighting.
Tungsten
—corrects the orange
cast of household incandescent
(tungsten) or halogen light bulbs. Ideal
for indoor pictures without flash.
Fluorescent
—corrects the green
cast of fluorescent lighting. Ideal for
indoor pictures under fluorescent lighting
without flash.
The lighting change is displayed on the screen and the icon appears in
the status area (except in Auto).
4 Press the Menu button to exit the menu.
This setting remains until you change it or use Reset (see
page 40 ) to
return to the default setting.