Kodak DX6490 - Manual (Page 52)

40
Chapter 2
Resetting Manual Settings to Defaults
Reset is available in PASM mode only; it returns your manual settings to the
original factory defaults.
Reset does not change settings for any mode except PASM.
1 In PASM mode, press the Menu button.
2 Move the joystick to highlight Reset , then press the OK button.
3 Move the joystick to highlight an
option, then press the OK button.
Continue—resets all PASM (manual)
settings and returns you to the Menu
screen.
Cancel (default)—returns you to the
Menu screen without changing your
manual settings.
4 Press the Menu button to exit the menu.
See page 111 for a list of the original factory settings.
The settings that revert to the factory defaults:
Program mode Color Mode Orientation Sensor
Exposure comp. Exp. Metering Flash
White Balance Focus Zone
ISO Speed Date Stamp
0.0