Aastra Telecom AastraLink RP CT Cordless - Manual (Page 84)

84 AastraLink RP Phone User Guide
Using Your 6757i CT RP Cordless Handset
• A newly registered handset or handset that was out-of-range during the
programming needs to perform an "off-hook and on-hook" sequence in order for
the newly programmed function to be broadcast. Simply press the
v key from
the idle state to go off-hook. Then, press the
y
key to go back on-hook.
• Duplicate functions can exist in the feature key as there is no filtering or duplicate
checking done on the handset or the base.
• If no line keys are programmed for the feature key, the handset is restricted to
intercom calls only.
• If all 12 programmable functions have been programmed to "None", the user is
presented with a List empty message when the feature key is pressed.
• For security reasons, the user has 180 seconds (3 minutes) to complete the
programming. Otherwise, the phone displays the following error:
** Error **: Session expired , Please reload page.
• For security reasons, the user must submit the page from the same browser that
was used to load the page. If the user tries to submit the page from any other IP
address, the following error displays:
** Error ** Session invalid. Different Client IP Addresses. — Please reload
page
Programming Feature Keys
You can program up to 15 feature keys on the 6757i CT RP phone using the Aastra
Web UI.
List empty
Use web page to
configure