Norgren Roundline Plus Stainless Steel Body Actuators - Manual (Page 19)

ACT- 152
A
C
TUA
TORS
Norgren.com/usa – 303.794.2611 – [email protected]
RPD 106 x 3.250 - DAN - PS
RPD Series Delrin ® End Cap
Roundline Plus Stainless Steel Body Actuators
9/16" to 2" bore
Double acting pneumatic actuators
Delrin Acetal Resin end cap
cylinders for washdown, and
corrosive environment
application
Technical data
Medium:
Filtered, lubricated or non-
lubricated, compressed air
Maximum Operating
Pressure:
125 psig (8.6 bar)
Temperature Range:
Standard Nitrile Seals:
32° to 160°F (0°C to 72°C)
Lubrication:
All RPD cylinders are pre-
lubricated during assembly with a
Teflon ® based grease for non-
lube service and long life.
Materials
Cylinder Body:
304 Series stainless steel
Head and Cap:
Delrin Acetal Resin
Piston Rod:
300 Series chrome plated
stainless steel
Piston: Anodized aluminum alloy
or stainless steel
Rod & Piston Seals: Nitrile
Mounting Accessories: 300 Series
stainless steel
Options selector
Bore Size
9/16"
056
3/4" 075
1-1/16" 106
1-1/2" 150
2" 200
Series
RPD Series Delrin end cap
RPD
RPD Series Delrin with *ERPD
Ecology Seals*
* Ecology version not available on
9/16" bore RPD cylinder
Stroke
Increments of 1/16" up to 36"
Mounting Options (all models are double acting)
Nose DAN
Double End (with pivot hole) DAD
Double Rod End DRD
Additional Options
Alternate female thread
FT (_)
(Specify thread type)
Viton seals
HT**
Switch rail and position M1, M2,
M3, M4
Side ported end cap PC
(DAN mount only)
Alternate port location
PL(_)
Plain rod end PR
Magnetic piston PS
Rod extension over std. RX(_)
(specify additional length)
Rod wiper
RW†
Alternate male thread TM (_)
(Specify thread type)
Thread extension over std.
TX(_)
(specify additional length)
Bumper both ends
UB
** Viton seals are for chemical compatibility applications,
and are not available in Ecology 1-1/16" bore
† Rod wiper not available on 9/16" bores
Delrin® is a registered trademark of E.I. Du Pont de
Nemours and Company for its brand of acetal resin.