Norgren Roundline Plus Stainless Steel Body Actuators - Manual (Page 15)

ACT- 148
A
C
TUA
TORS
RPHD Series Magnetic Roundline
Plus Stainless Steel Body Cylinders
Double acting
9/16" - 2-1/2" bores
Norgren.com/usa – 303.794.2611 – [email protected]
Technical Data
Medium:
Filtered, lubricated or non-
lubricated, compressed air
Maximum Operating
Pressure:
250 psig (17.2 bar)
Temperature Range*:
Standard nitrile seals:
-20°F to 200°F (-29°C to 93°C)
Viton / High temp seals:
-20°F to 400°F (-29°C to 205°C)
* With dew point of supply air less than air
temperature below 36°F (2°C).
Lubrication:
All RPHD cylinders are pre-
lubricated during assembly with a
Teflon® based grease for non-
lube service and long life.
Materials:
Cylinder Body:
304 Stainless Steel
Head and Cap:
Aluminum alloy
Piston Rods:
300 series, chrome plated
stainless steel
Rod Bearings:
Oil impregnated sintered bronze
Piston:
Aluminum Alloy or stainless steel
Rod & Piston Seals: Nitrile
Pivot bracket, rod clevis, foot
bracket, mounting nut:
Bright zinc plated carbon steel
Options selector
RPHD 106 x 3.250 - DAN - M2
Series Substitute
RPHD Series RPHD
Magnetic
Bore Substitute
9/16" 056
3/4" 075
1-1/16" 106
1-1/4" 125
1-1/2" 150
1-3/4" 175
2" 200
2-1/2" 250
Stroke
Increments of 1/16"
up to 36"
Mounting Options Substitute
(All models are double acting)
Nose
DAN
Double End (with pivot bushing) DAD
Double Rod End DRD
Options Substitute
Viton / High Temp seals HT*
Switch rail and position M1, M2, M3, M4
Side Ported end cap PC
(DAN mount only)
Alternate port location
PL(__)
Plain rod end PR**
Rod extension over std. RX(_)
(specify additional length)
Thread extension over std.
TX(_)
(specify additional length)
Bumpers both ends
UB*
*Viton seals and Bumpers are available in
combination; however, the temperature rating
of the cylinder is limited to the maximum
temperature rating of the bumpers.
Note: The magnetic field could be
compromised with temperatures in excess
of 200°F.
** PR Rod end will not have threads, but will
maintian the standard “A” dimension.