MSI PM-104 User Manual
Page 57
3-11
BIOS Setup
[Thermal Cr uise M ode]
CPUFAN1 TargetTemp Value, SYSFAN1 TargetTemp Value, SYSFAN2
Tar getTemp Value
Select a temperature setting here, and if the temperature of the CPU climbs
up to the selected temperature setting, the system will automatically in-
crease the speed of the CPU/system fan to cool down the overheated CPU.
CPUFAN1 Tolerance Value, SYSFAN1 Tolerance Value, SYSFAN2 Tol-
erance Value
You can select a fan tolerance value here for the specific range for the
“
CPUFAN1/SYSFAN1/SYSFAN2 TargetTemp Value” items. If the current tem-
peratures of the 3 fans reach to the maximum threshold (the temperatures
set in the “CPUFAN1/SYSFAN1/SYSFAN2 TargetTemp Value” plus the toler-
ance values you set here), the fans will speed up for cooling down. On the
contrary, if the current temperatures reach to the minimum threshold (the set
temperatures minus the tolerance values), the fans will slow down to keep
the temperatures stable.
[Speed Cruise M ode]
C PUFAN1 Tar getSpeed Value, SY SFAN1 Tar getSpeed Value,
SYSFAN2 TargetSpeed Value
Select a fan speed setting here, and if the fan speed of the CPU/system fans
climbs up to the selected fan speed setting, the system will automatically
increase the speed of the CPU/system fan to cool down the overheated
CPU.
CPUFAN1 Tolerance Value, SYSFAN1 Tolerance Value, SYSFAN2 Tol-
erance Value
You can select a fan tolerance value here for the specific range for the
“
CPUFAN1/SYSFAN1/SYSFAN2 TargetSpeed Value” items. If the current fan
speeds of the 3 fans reach to the maximum threshold (the fan speed set in
92B9v1.0-3.p65
2008/9/8, 上午 10:02
11
PDF created with pdfFactory Pro trial versi