MSI PM-104 User Manual
Page 54
3-8
MS-92B9 Server
Intel(R) SpeedStep(tm) Tech
EIST (Enhanced Intel SpeedStep Technology) allows the system to dynamically
adjust processor voltage and core frequency, which can result in decreased
average power consumption and decreased average heat production.
IDE Configuration
SATA#1 Configuration
This setting specifies the operation mode of the SATA port.
Configure SATA#1 as
s
This setting specifies the function of the on-chip SATA controller.
Primary/Secondary/Third/Fourth/Fifth IDE Master/Slave
[Type]
Press PgUp/<+> or PgDn/<-> to select
[Manual], [None] or [Auto] type. Note that the
specifications of your drive must match with
the drive table. The hard disk will not work
properly if you enter improper information for
this category. If your hard disk drive type is
not matched or listed, you can use [Manual] to
define your own drive type manually.
[LBA/Large Mode]
Enabling LBA causes Logical Block Ad-
dressing to be used in place of Cylinders,
Heads and Sectors
[Block(Multi-Sector Transfer)] Any selection except Disabled determines
the number of sectors transferred per block
[PIO Mode]
Indicates the type of PIO (Programmed Input/
Output)
92B9v1.0-3.p65
2008/9/8, 上午 10:02
8
PDF created with pdfFactory Pro trial versi