WIKA UT-11 User Manual

Page 9

d 1

.2.

Universal Pressure Transmitter UniTrans

Product Description

Subject to change due to technical modifications.

WIKA Alexander Wiegand GmbH & Co. KG · Alexander-Wiegand-Str. · 63911 Klingenberg ·

(09372) 132 - 710 · Fax - 706 · E-mail: [email protected] · www.wika.de

2.3

Installation Examples

The UniTrans is primarily used to monitor the pressure in pipes, technical equipment
and tanks. Depending on the pressure range pressures between 20 mbar up to 1000
bar can be measured. The pressure is measured using absolute (against a vacuum)
or relative (against external or air pressure) measurement depending on the type of
sensor selected.

The UniTrans is also used for hydrostatic pressure measurement within liquid filled
pipes and containers.

Process Pressure Measurement:

Used to measure pressure of liquids

Used to measure container pressure.

or gases in pipelines.

Process Pressure Measurement:

Installed behind feed pumps for

Installed in front of and behind the filter.

process control or monitoring of pump

Uses the pressure differential for moni-

functions.

toring the function or accumulation of dirt

in the filter. Both output signals are pro-

cessed by a PLC or signal converter.

This manual is related to the following products:

UT-10