DuraVent PelletVent Pro - Manual (Page 7)

7
Figure 2
Figure 3
the ceiling (Figure 2). At your marked center
point, cut and frame a square hole in the
ceiling for installation of the Ceiling Support or
Firestop Spacer (Figure 3). Refer to Table 1
for the dimensions of the hole.
C. Connect Pipe Adapter or Increaser Adapter
to stove: Due to the variety of different stove
collars, the Pipe Adapter will need high-
temperature non-hardening sealant in order to
achieve a leak-free connection. .
D. Connect Pipe Sections. Attach PelletVent
Pro Pipe Sections by pushing male and female
ends of pipe together and twisting until pipe
is in locked position (Figure 4). PelletVent
PELLETVENT PRO
COMPONENT
FRAMING DIMENSIONS
3" & 4" Ceiling Support /
fireStop SpaCer
7" x 7"
3" & 4" Cathedral Ceiling
Support box
10 ¾" x 10 ¾"
3" & 4" wall thimble
3" & 4" CaS wall thimble
7 ½" x 7 ½"
3" & 4" wall thimble air
intake kit
9" x 9"
Table 1