DuraVent PelletVent Pro - Manual (Page 11)

11
Figure 12
Figure 13
Figure 14
Connect the flexible hose with clamp to the
exterior half of the Wall Thimble. Guide the
flex through the opening in black interior half
of Wall Thimble, gently pull the flex towards
appliance (Figure 12), and if necessary trim
excess flex to required length with snips.
Secure flex to combustion air inlet of the stove
with clamp provided. Only connect metal flex
to the appliance; do not substitute or install
plastic flex. The cover plate comes installed
on the lower left corner of the thimble with
intake guard pointing downward to deflect
rain. If it is desired to rotate thimble and air
inlet to another corner, remove the (2) screws
on the inlet guard and re-attach over air inlet
at new location. Secure black interior half of
the Wall Thimble to the interior wall, and the
unpainted exterior half are to be secured to the
exterior wall on both styles of thimbles (Figure
13). The Wall Thimbles adjust to fit walls from
4”-8” thick. For installation in thicker walls an
extension tube may be field fabricated.
WARNING: Do NOT install any insulation
or other material within the Wall Thimble
itself. Doing so can create a fire hazard.
The Wall Thimble requires the created air