Kramer Electronics 704 - Manual (Page 31)

KRAMER ELECTRONICS LTD.
28
EXCLUSION OF DAMAGES
Kramer’ s liability for any defective product is limited to the repair or replacement of the product (according to
Kramer’ s decision). Kramer shall not be liable for:
1) Damage to other property caused by defects in this product, damages resulting from inconvenience, loss of
use of the product, loss of time, commercial loss; or
2) Any other damage, whether incidental, consequential or otherwise. Some countries may not allow
limitations on the period of an implied warranty and/or do not allow the exclusion or limitation of incidental
or consequential damages, hence the above limitations and exclusions may not apply to all Kramer
customers.
This warranty entitles the customer to specific legal rights, but customers may have additional rights, that vary
according to the law in different countries.
NOTE: All products returned to Kramer for service must have prior approval that may be obtained from
Kramer dealers.
NOTICE
This equipment has been tested to determine compliance with the requirements of:
EN-50081: "Electromagnetic compatibility (EMC); generic emission standard.
Part 1: Residential, commercial and light industry"
EN-50082: "Electromagnetic compatibility (EMC) generic immunity standard.
Part 1: Residential, commercial and light industry environment".
CFR-47 FCC Rules and Regulations: Part 15- “ Radio frequency devices:
Subpart B- Unintentional radiators
CAUTION!
Servicing the machines can only be done by an authorized Kramer technician. Any user
who makes changes or modifications to the unit without the expressed approval of the
manufacturer will void user authority to operate the equipment.
Use the supplied DC power supply to feed power to the machine.
Please use recommended interconnection cables to connect the machine to other
components.