3 getting to know your fc-4041c, Kramer electronics ltd. 8 – Kramer Electronics FC-10 User Manual
Page 11

Kramer Electronics Ltd.
8
5.3 Getting to Know Your FC-4041C
The KRAMER FC-4041C is a full broadcast, state-of-the-art Genlock RGB/Component to
Composite Video/YC Encoder designed for studio and other demanding applications. The FC-
4041C encodes RGBS or Component Y, R-Y and B-Y signals to Composite Video and Super-
Video signals. All inputs are looped through with termination switches, allowing for parallel
connection to other RGBS/Component acceptors. From front panel switches, the FC-4041C
allows the user to select whether Sync is separate or riding on Green. The user can also select
whether to convert RGBS or Component signals to Composite and Y/C. The outputs are DC
coupled and Black-Level clamped. Front/Rear panel features of the FC-4041C are described in
Figure 3 and Table 4.
NOTE
For operation instructions refer to section 9.
Figure 3: FC-4041C Front/Rear Panel Features
Table 4: FC-4041C Front/Rear Panel Features
No.
Feature
Function
1.
Power Switch
Illuminated switch supplies power to the unit.
2.
Trimmers
Not used.
WARNING
!
Adjustments or attempted adjustments of the
trimmers are not allowed. Failure to comply with
this warning may damage the machine.
3.
INPUT RGB/Comp pushbutton
Illuminated pushbutton: selecting RGB or Component input
4.
SYNC Black/G+S pushbutton
Illuminated pushbutton: selecting sync source – separate or riding on
Green.
5.
Red/R-Y IN BNC connector
Red/R-Y Input
6.
Red/Green/Blue 75
Ω/Hi-Z
selectors
Selects “75
Ω“ or “HI-z” impedance when pushed in the selected
direction (for looping select "Hi-z").
7.
Red/Green/Blue LOOP BNC
connector
Provides Red/R-Y looping capability to increase number of outputs.
8.
Green/Y IN
Green/Y Input
9.
Blue/B-Y IN BNC connector
Blue/B-Y Input
10.
Sync IN BNC connector
Sync signal input.
11.
Y/C 4P connector
s-Video output.
12.
COMPOSITE BNC connector
Composite video output.
13.
Power Connector
A 3-prong AC connector allows power to be supplied to the unit.
Directly underneath this connector, a fuse holder houses the appropriate
fuse.