Kramer Electronics FC-24ETH - Manual (Page 3)

FC-21ETH – Contents i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Recycling Kramer Products 3
3 Overview 4
4 Defining the FC-21ETH, FC-22ETH and FC-24ETH Ethernet Controllers 6
4.1 Defining the FC-21ETH Ethernet Controller 6
4.2 Defining the FC-22ETH Ethernet Controller 8
4.3 Defining the FC-24ETH Ethernet Controller 10
5 Initial Configuration and Use Overview 12
5.1 Configuring the FC-21ETH, FC-22ETH and FC-24ETH 12
5.2 Configuring a Virtual Port on the PC 14
5.3 Configuring an Ethernet Connection on the PC 14
6 Connecting the FC-21ETH, FC-22ETH and FC-24ETH 15
6.1 Connecting via Ethernet 17
6.2 Connecting to the Ethernet Controller via RS-232 21
6.3 Connecting to a Controlled Device via the RS-485 Port 21
7 Operating the FC-21ETH, FC-22ETH and FC-24ETH Remotely via the Web
Pages 23
7.1 Browsing the FC-24ETH Web Pages 23
7.2 Connected Clients Page 25
7.3 Device Settings Page 26
7.4 Communication Page 27
7.5 Serial Port Settings Page 28
7.6 Security Page 29
7.7 Logs Page 31
7.8 About Us Page 32
8 Configuring and Maintaining the FC-21ETH, FC-22ETH and FC-24ETH 33
8.1 Selecting the RS-232 or RS-485 Serial Port 33
8.2 Terminating the RS-485 Bus 33
8.3 Activating DHCP 34
8.4 Resetting to the Factory Default Settings 34
8.5 Upgrading the Firmware 34
9 Technical Specifications 35
9.1 Data Handling Performance 35
9.2 Example Bandwidth Calculation 36
10 Default Communication Parameters 37
11 Kramer Protocol 3000 38
11.1 Kramer Protocol 3000 Syntax 38
11.2 Kramer Protocol 3000 Commands 40