Kramer Electronics VS-88DVI - Manual (Page 15)

12 VS-88DVI - Operating the VS-88DVI
Figure 4: SELECTOR Buttons
The gray numbers (1 to 16) in Figure 4 that illustrate the corresponding store/recall
configuration numbers, are for the purpose of illustration only and do not actually appear on
the buttons
To store a setup:
1. Set the machine to the desired input/output connection setup.
2. Press the STO button.
The STO button flashes.
3. Select an OUT or IN SELECT button to store the machine setup (for
example, OUT 5).
4. Press the LOCK button to store the current setup.
In this example, the OUT 5 button stores the setup.
You have to press the LOCK button within 10 seconds, before the store operation times
out.
To recall a setup:
1. Press the RCL button.
The RCL button flashes.
2. Press the relevant OUT or IN button that stored the setup.
In this example, press OUT 5.
3. Press the LOCK button to recall the stored setup.