Kramer Electronics VS-66HN - Manual (Page 14)

VS-66HN - Operating the VS-66HN 6x6 HDMI Matrix Switcher 11
6 Operating the VS-66HN 6x6 HDMI Matrix
Switcher
This section describes:

Switching an input to an output (see Section 6.1 )

Acquiring the EDID (see Section
6.2
)

Storing and recalling switch settings (see Section
6.3
)

Resetting the VS-66HN (see Section 6.4 )

Switching Between Protocol 2000 and Protocol 3000 (see Section 6.5 )

Connecting to the VS-66HN via RS-232 (see Section 6.6 )

Connecting to the VS-66HN via Ethernet (see Section
6.7
)

Upgrading the Firmware (see Section
6.8
)
6.1 Switching an Input to an Output
To switch an input to an output:

Press an output button followed by an input button to switch the selected
input to the selected output
6.2 Acquiring the EDID
You can acquire the EDID from any of the following:

One output set to one or more of the six inputs (see Section
6.2.1
)

Different outputs set to different inputs (see Section
6.2.2
)

The default EDID (see Section
6.2.3
)
Note: Attempting to acquire the EDID from an output that does not have a display
device connected to it results in the default EDID being acquired.