Kramer Electronics VS-44FO - Manual (Page 28)

VS-44FO - Operating the VS-44FO 25
6.4 Upgrading the Firmware
The VS-44FO uses a microcontroller that runs firmware located in FLASH
memory. The latest version of firmware and upgrade instructions can be
downloaded from the Kramer Web site at
http://www.kramerelectronics.com/support/product_downloads.asp and updated in
minutes using K-UPLOAD.
The USB port is used for connecting the VS-44FO to a PC to transfer the data.
6.5 Changing the Device Parameters
To change the device parameters do the following:
1. Connect a PC to the VS-44FO (see Section 5.3 ).
2. Open K-UPLOAD (see Section 5.6 ).
3. Click the Connect button to open the Connect window.
4. Choose the appropriate type of connection: Ethernet, Serial or USB, and
click Connect.
The Connect window disappears and the Device Properties become visible.
5. Change the parameters as required and then click Save.